Filling Instructions:Recommended Gas: Kerosene Based, Powerful, High Quality Lamp OilUnscrew bottom fuel vessel. Unscrew knurled ring surrounding burner. Lift burner out and fill vessel with fuel. Replace burner and screwed knurled ring. Light wick and adjust flame to approximately 1/8″ by means of the Wick Pricker Pin. Screw gas container to upper part of lamp and after permitting about one minute for the lamp to achieve air circulation, the flame could be raised to the necessary height. A fire height of 1/2″ is advised. Brasso, Wenol) and using a dry, soft, clean cloth, rub off briskly to attain a bright polished finish.
It’s important that the wick be cut level with the burner tube, and that the carbon deposit be washed off regularly, to guarantee a bright light. To dismantle, first unscrew the gas vessel to expose the brass ring supporting the lamp glass. The ring is slotted and, by means of a proper forked tool, (a flat headed screw driver may work) it can be unscrewed to release the inner fittings. Care needs to be taken to see that all parts are replaced in the right order.Please notice: Don’t Overfill the Fuel Vessel. We suggest that the gas vessel be 3/4 full.Caution: Do not use any sort of spirit or alcohol based fuel.